Exporting AGS files (G1)

Introduction

GeoDin enables you to export AGS files in compliance with the AGS 4.0.4 and AGS 4.1.1 standards. We support AGS exports from the Geotechnical object type G1 Location.

Supported AGS Groups

We currently support the following AGS groups:

Group	Description
ABBR	Abbreviation Definitions
CONG	Consolidation Tests - General
CONS	Consolidation Tests - Data
CORE	Coring Information
DETL	Stratum Detail Descriptions
DICT	User Defined Groups and Headings
ESCG	Effective Stress Consolidation Tests - General
ESCT	Effective Stress Consolidation Tests - Data
GCHM	Geotechnical Chemistry Testing
GEOL	Field Geological Descriptions
GRAG	Particle Size Distribution Analysis - General
GRAT	Particle Size Distribution Analysis - Data
ISPT	Standard Penetration Test Results
IVAN	In Situ Vane Tests
LDEN	Density Tests
LLPL	Liquid and Plastic Limit Tests
LNMC	Water/Moisture Content Tests
LOCA	Location Details
LPDN	Particle Density Tests
LPEN	Laboratory Hand Penetrometer Tests
LRES	Laboratory Resistivity Tests
LSLT	Shrinkage Limit Tests
LVAN	Laboratory Vane Tests
PROJ	Project Information
PTST	Laboratory Permeability Tests
RDEN	Rock Porosity and Density Tests
RELD	Relative Density Tests
RPLT	Point Load Testing
RUCS	Rock Uniaxial Compressive Strength and Deformability Tests
SAMP	Sample Information
SHBG	Shear Box Testing - General
SHBT	Shear Box Testing - Data
TYPE	Definition of Data Types
TREG	Triaxial Tests - Effective Stress - General
TRET	Triaxial Tests - Effective Stress - Data
TRIG	Triaxial Tests - Total Stress - General
TRIT	Triaxial Tests - Total Stress - Data
UNIT	Definition of Units

Step-by-Step Guide

1. Select Boreholes for Export

Begin by selecting the boreholes you wish to export. You can choose from:

• All objects

• Location

• A group

• A query

Select objects

2. Open the Publish and Export Method

After selecting the boreholes, navigate to the Publish and Export method.

Publish and export

3. Choose Export to AGS-format

Within the Publish and Export method, select the Export to AGS-format option.

Export to AGS format

4. Define the AGS Standard

In the export area, select the AGS standard you want to use by choosing the corresponding AED file.

Define AGS standard

5. Provide Details for AGS Group "TRAN"

In the TRAN section, enter all necessary details for the AGS group TRAN.

TRAN

6. User defined groups

To exclude specific groups from the AGS export, check the User defined groups option.

User defined groups

7. Execute the Export

Once you have made your selections, click the Execute button to perform the AGS export.

Export AGS

Additional Options

Export Object to separate AGS files

By selecting this option, an AGS file will be created for each object.

Export objects to separate AGS files

Select coding standard

If you need to export according to a specific coding standard, choose your desired standard from the drop-down menu. Ensure that a lithological description according to the selected coding standard is available within the object. By default, the first encountered coding standard will be used.

Coding standard